WS₂ SPECIAL PASTE (TUNGSTEN DI SULPHITE)
WS₂ Special Paste (Tungtsen Di Sulphite)
It is a semi-synthetic, low-penetration grease also has been produced with high viscous synthetic base oil, high rate WS₂ particles and special additives.
Applications
WS₂ (tungsten di sulfide) in the grease content is the most lubricant known in the world.It has the anti-friction feature that can not be compared with anything else due to the coefficient of friction is 0.03. It can operate without problems in high and low temperature. It can operate at -270 ° C / + 650 ° C under normal atmosphere and -188 ° C / +1316 ° C under vacuum. Because of its superior properties, WS₂ is also used by NASA. These superior properties of WS₂ are combined with grease technology and produced a superior quality grease. It can be used in automotive and industrial field, shaft bearings and wheels.It can be used in gears under heavy conditions, in bearings, chains, valves in a wide temperature range. It is used in places exposed to sun and salt water.
Features and Benefits
| High Compressive Strength Performance | Due to its WS₂ (tungsten di sulfide) particles, the extreme pressure characteristics are excellent and work well under extreme load. |
| High Resistance to Extreme High Heat and Sunlight | It has to a high drip point makes it suitable for operation at high temperatures. It is resistant to sunlight and high temperature. |
| High Abrasion Prevention Efficiency and Active Lubrication Performance | The low friction coefficient of WS₂ increases lubricity by reducing friction. |
| Long Service Life | Owing to its semi-synthetic structure, the oxidation rate is low and its service life is long. |
| Antitoxic Effect Feature | It does not contain any aromatic compound and does not have toxic effect. |
| Hydrophobic Structure Feature | It is resistant to water, rust and damp environments. |
Technical Specifications
| SOLID LUBRICANT TYPE | - | WS₂ (TUNGSTEN DI SULFIT) |
| THICKENER TYPE | - | Bentonite |
| SOAP TYPE | - | Soapless |
| OIL TYPE | - | Synthetic / Mineral |
| DRIPPING POINT, °C | ASTM D 566 | Do not Drop |
| OPERATING TEMPERATURE, °C | - | -270 / +400 max + 650 |
| COLOR | - | Grey |
| PENETRATION VALUE OF PROCESSED, at 25⁰C, 60 COUP | ASTM D 217 | 220-250 |
| NLGI | - | 3 |
* Data given above are typical properties and may vary slightly.
REV02 JANUARY 2021
