TÜRKÇE ENGLISH

SHIP LAUNCHING BASE COAT

SHIP LAUNCHING BASE COAT

Ship Launching Base Coat is applied onto a sled and is the bottom layer forming material which large tonnage ship for launching.

Application

Speedol Ship Launching Base Coat will be administered in the form of melted on the sled.

Usage

Ship launching base coat is used in sled launched ships in the shipyard.

Properties 

  • High protection performance: It makes protective duties in the sled.
  • Rust, oxidation and high resistance against sea water feature: It is resistant to oxidation, rust and seawater.

Technical Properties

APPEARANCE

-

SOLID

SOLUBILITY

-

INSOLUBLE IN WATER

*MELTING POINT, °C

ASTM D 566

70

*COEFFICIENT OF FRICTION, µ

ASTM D 1894

0,034

DENSITY, 23 C, g/cm3

ASTM D 792

0,89 - 0,91

*Data given above are typical properties and may vary slightly.

Warnings and Recommendations

- Keep away materials covered with Base Coat and Slip Coat from places welding and the source of the fire.
- The product can be used several times (%50-%90 rate) taken out of the sled again dissolved after use. But, it should be noted that the effect of the product decreases with each use.
- Using protective equipment (glasses, gloves) during the application of the product is recommended.

-Care must be taken when pouring so that the Speedol Ship Launching Base Coat does not crack.

  •  The slipways should be well cleaned,
  •  It should not be boiled much, it should be melted and poured at an average of 70 °C,
  • -It should not be applied in windy weather,
  • It should not be applied on wet and damp surfaces.


**In cases where a special use is not required, after the product is fed between the slipways (after the ground is filled), an average of 2 cm height is laid and the surface of the Speedol Ship Launching Base Coat is smoothed and hardened. The amount of Speedol Ship Launching Base Coat to be applied to achieve this height after feeding is approximately per m2. It weighs between 18 and 20 kg.

 

 

 

REV04  SEPTEMBER  2022

 

HAKKIMIZDA

1994 yılında kurulan Koçak Petrol Ürünleri Sanayi ve Ticaret Ltd. Şti. bulunduğu coğrafyanın önde gelen madeni yağ ve gres üreticileri arasında gösterilmektedir. Otomotivden endüstriye, havacılıktan denizciliğe, tekstilden savunma sanayine kadar 300 adetten fazla ürüne, 700’den fazla ambalaj çeşidine sahiptir. Gebze’de 4 bin 500 metrekaresi kapalı toplam 12.500 metrekare alan üzerine kurulu Madeni yağ Gres ve Harmanlama Dolum Tesisi ile ISO 45001, ISO 9001, ISO 14001 standartlarına uygun olarak üretim gerçekleştirmektedir. Firmanın madeni yağ kapasitesi günde 1 sarj ve 8 saat çalışma esası alındığında; 40.504 MT / yıl, gres kapasitesi ise 6.480 MT/yıldır, Antifriz 7.793 MT/yıldır. 4 kıtada Rafinol, Speedol, Ranuna ve F6 markalı ürünleriyle varlığını sürdüren Koçak Petrol, ABD başta olmak üzere 40 ülkeye ihracat gerçekleştiriyor.

İLETİŞİM

Adres :
Koçak Petrol Ürünleri San. ve Tic. Ltd. Şti.
Pelitli Mahallesi, 4434 Sok. No:43 41400 Gebze / Kocaeli
Tel: +90 (262) 751 36 72
Fax:+90 (262) 751 36 78
speedol@speedol.com.tr 

Google HARİTA

E-BÜLTEN

Bilgilendirmelerimizi almak, haber ve yeniliklerimizden haberdar olmak için lütfen e-bültenimize üye olunuz.