RADIATOR STOP LEAK
Radiator Stop Leak
Radiator Stop Leak is a sealing product developed to prevent small leaks in the refrigeration and to protect the system from refrigerant leaks.
Properties
- The radiator prevents small leaks in the cooling and heating system.
- This product prevents leaks in the cylinder lid.
- The metal in the cooling system does not damage the rubber seals and hoses.
- It is compatible with all refrigerants and antifreezes, including Organic Acid Technology.
- The radiator is formulated to prevent waterways and temperature sensors from clogging.
- Provides protection against rust and corrosion.
Application
- Gasoline, diesel engine and LPG powered vehicles,small leaks in water-cooled systems time use is recommended.
- It can also be used as a leak inhibitor in non-leaking situations.
Usage
The engine is started and all heater controls are brought to the engine operating temperature in the warmed condition.
Radiator Stop Leak is added to the radiator with sufficient cooling liquid inside it
The engine is start up for 5 minutes to allow the system to circulate.
If the cooling system is dirty, the radiator system is cleaned and put it in the system with the new cooling fluid.F6 Radiator Stop Leak the handler, the above described procedures are applied.
1 bottle (300 ml) F6 Radiator Cracker The pusher is sufficient for the cooling system with volume of 7-10 liters.
It is recommended to use it temporarily to get rid of leaks.
At the end of the process the tiny cracks become clogged and the leakage is cut off.
Storage Condition
The bottle should be stored in a place where the sun is not visible at a temperature range of + 5⁰C / + 35⁰C.Otherwise, the product can be observed crystallization.The crystallized product should never be transferred to the radiator / industrial radiator systems of the vehicle!
