TURBINE OIL GII
Turbine Oil GII
Turbine Oil GII is formulated from highly refined base oils combined with superior additive technology.
Usage
It is suitable for lubrication of high load industrial gas turbines at heat soaking period during run down and high local temperatures or intermittent operation. It has the features of air evacuation, foaming and water separation for steam turbines.
Properties
- Superior Thermal / Oxidation Durability: Excellent thermal / oxidation stability even under extremes of thermal stress
- Water Push Properties: Good water separation and corrosion inhibition performance
- High Filtration Feature: Excellent filterability minimising the possibility of additive removal even under ultra-fine filtration and the presence of moisture
- Proven Performance: Well proven in high performance gas turbines with extensive field experience
Technical Properties
|
ISO VISCOSITY GRADE |
STANDARD |
32 |
46 |
|
Kinematic Viscosity at 40 °C, cSt |
ASTM D 445 |
31,65 |
46,2 |
|
Density, 20°C, kg/m³ |
ASTM D 4052 |
0,852 |
0,862 |
|
Viscosity Index |
ASTM D 2270 |
112 |
111 |
|
Flash Point, °C |
ASTM D 92 |
222 |
228 |
|
Pour Point, °C |
ASTM D 97 |
-33 |
-30 |
|
Total Acid Number, mg KOH/g |
ASTM D 664 |
0,01 |
0,05 |
|
Foam Sequence I - Tendency / Stability, ml/ml, I. STAGE |
ASTM D 892 |
0/0 |
10/0 |
|
Rust Test, Distilled Water (24h) |
ISO 7210 / ASTM D 665A |
Pass |
Pass |
|
Rust Test, Synthetic Sea Water |
ISO 7120 / ASTM D 665B |
Pass |
Pass |
|
Copper Corrosion (3h,150°C) |
ISO 2160 / ASTM D130 |
1a |
1b |
|
Oxidation Stability-TOST |
ISO 4263-1 / ASTM D943-95 |
>10000 |
>10000 |
|
Oxidation Stability-RPVOT |
ASTM D 2272 |
1100 |
1100 |
|
FZG Gear Scuffing Test (A/8.3/90) |
ISO 14635-1 |
9 |
9 |
* Data given above are typical properties and may vary slightly.
Performance
DENISON HF-0 /1/2, CINCINNATI MILC-P68-P69- P70, T6C-020, DIN 51524 PART II, M - 2950 – S, AFNOR NF E 48-603, I - 286 - S3, CETOP RP91H
MARCH 2018 REV02
