SYNTHETIC TURBINE OIL S
Synthetic Turbine Oil S
Speedol Synthetic Turbine Oil S is a premium industrial steam, gas and combined cycle türbine oil for geared turbines.
Properties
- Antioxidant system which will impart extended oxidation life. It also contains EP/antiwear additives which give excellent protection to geared steam and gas turbines. Delivers exceptional resistance to degradation, even under conditions of high oxidative and thermal stress. Excellent results in TOST life test (ASTM D943) demonstrate the potential for Speedol Synthetic Turbine Oil S to offer extended service life, reduced maintenance costs and less downtime when compared to conventional mineral based oil technology.
- Designed to give outstanding demulsiblity performance and turbine oil life.
- Primarily designed for use in hydrotreated base stocks giving excellent oxidative stability and good deposit control, leading to longer fluid service intervals and a reduction in varnish related equipment failures and downtime.
- Includes efficient EP/ antiwear chemisrty for the long life of gearsets and bearings as well as reliable operation of control system in geared and gas turbines.
- Robust rust and anti-corrosion performance for maximum equipment protection
- Includes silicon-free antifoam for excellent foam control, resulting in reliable operation.
Technical Properties
| ISO VISCOSITY GRADE | STANDARD | 32 | 46 |
| Kinematic Viscosity at 40 °C, cSt | ASTM D 445 | 32 | 46 |
| Density, 20°C, kg/m³ | ASTM D 4052 | 0,84 | 0,845 |
| Viscosity Index | ASTM D 2270 | 136 | 140 |
| Flash Point | ASTM D 92 | 230 | 230 |
| Pour Point | ASTM D 97 | -36 | -27 |
| Acid Number, mg KOH/g | ASTM D 664 | 0,12 | 0,15 |
| Foam Sequence I - tendency / stability, ml/ml, I, II, III. STAGE | ASTM D 892 | 0/0 | 0/0 |
| Rust Test, Distilled Water (24h) | ISO 7210 / ASTM D665A | Pass | Pass |
| Rust Test, Synthetic sea Water | ISO 7120 / ASTM D665B | Pass | Pass |
| Copper Corrosion(3h 150°C) | ISO 2160 / ASTM D130 | 1a | 1b |
| Water Separability minutes to 3 emulsion mL Minutes | ASTM D1401 | 15 | 15 |
| Steam Demulsibility Seconds | IP 19 | 90 | 95 |
| Oxidation Stability-RPVOT | ASTM D2272 | 1400 | 1400 |
| TOST lifetime hr | ASTM D943 | 10 000+ | 10 000+ |
* Data given above are typical properties and may vary slightly.
Performance
Siemens TLV 9013 04 (EP), Siemens TLV 9013 05(EP), Alstom HTGD 90117 W0001 (EP), DIN 51515 part I& II, GEK 32568J, GEK27070, GEK 46506E, GEK 101941A, CM P-38, P-55, P-54
MAY 2019 REV02
