Transformer Oil SUX
Trafo Yağı SUXTransformer Oil SUX has been developed and formulated to provide strong resistance to oil degradation. Provide excellent oxidation stability for a longer transformer life requiring less maintenance.
Usage
This product has been developed for use in oil-filled electrical equipment, especially power and distribution transformers, rectifiers, circuit breakers and switches.
Features
- It provides very good heat transfer:
Thanks to its low viscosity and viscosity index, it offers extremely good heat transfer properties to ensure efficient removal of heat from the center and bobbins. - There is excellent oxidation stability:
It has been developed and formulated to provide excellent resistance to oil degradation, providing excellent oxidation stability for prolonged transformer life and minimum maintenance. - Low temperature performance:
The naftanical feature allows the transformer to operate at the lowest possible temperature without the use of flow-point reducers. - High dielectric strength:
When this insulation oil is properly stored and used, it meets the most demanding demands on the dielectric strength and provides performance on these demands. - High Performance Base oil dispersant Feature Naphthenic:
Naphthenic base oil structure with 100% foreign matter and particles are contained in the distributive property. Pollution does not allow the influence of isolation.
Technical Specifications
| Kinematic Viscosity @40°C, cSt | ISO 3104 | Max. 12.0 |
| Kinematic Viscosity @-30°C, cSt | ISO 3104 | Max. 1800 |
| Pour Point, °C | ISO 3016 | Max. -40 |
| Water Content, mg/kg | IEC 60814 | Max. 30 |
|
Breakdown Voltage -Before Treatment, kV -After Treatment, kV |
IEC 60156 IEC 60296 |
Min. 30 Min. 60 |
| Density @20°C, kg/dm3 | ISO 12185 | Max. 0,89 (Typical 0,875) |
| DDF @90°C | IEC 60247 | Max. 0,005 |
| Colour | ISO 2049 | Max. 0.5 |
| Appearance | Visual | Clear and Free of Sediment |
| TAN, mg KOH/g | IEC 62021 | Max. 0,01 |
| Interfacial Tension @25˚C, mN/m | EN 14210 | Min. 40 |
| Total Sulfur Content, wt% | ISO 14596 | Max. 0,05 |
| Corrosive Sulfur | DIN 51353 | non-corrosive |
| Potentially Corrosive Sulfur | IEC 62535 | non-corrosive |
| DBDS, mg/kg | IEC 62697-1 | not detectable |
| Antioxidant, %wt | IEC 60666 | 0,08-0,4 |
| Metal content | IEC 60666 | not detectable |
| 2-Furfural and Related Compounds Content, mg/kg | IEC 61198 | <0.05 |
| Aromatic Content | IEC 60590 | 5 |
|
Oxidation Stability (120°C, 500h); TAN, mg KOH/g Sludge, wt% DDF (90°C) |
IEC 61125 C |
Max. 0,3 Max. 0,05 Max. 0,1 |
| Flash Point, °C | ISO 2719 | Min. 135 |
| PCA, wt% | IP 346 | Max. 3 |
| PCB | IEC 61619 | not detectable |
Performance
IEC 60296:2020 edition 5.0 TYPE B (TVBI)
Approved by TEIAS.
Revision Number
01.02.2025 / REV00