2T Outboard Pro Oil
2T Outboard Pro Oil
This is a water cooled gasoline marine engine oil blended with paraffinic based base oil refined using advanced technology and additives that increase engine protection, provides homogeneous mixture with gasoline.
Usage
2T Outboard is used in injection or oil-fuel mixed outboard marine engines, mixed with gasoline at the mixture ratios recommended by vehicle manufacturers.
| Mixing Ratio Recommended by Engine Manufacturer | Amount of Product to Be Added to Gasoline | |||||
| 1 L | 5 L | 10 L | 20 L | 50 L | 100 L | |
| 20:1 | 50 ml | 250 ml | 500 ml | 1.0 L | 2.5 L | 5.0 L |
| 25:1 | 40 ml | 200 ml | 400 ml | 800 ml | 2.0 L | 4.0 L |
| 30:1 | 33 ml | 167 ml | 333 ml | 667 ml | 1.7 L | 3.3 L |
| 32:1 | 31 ml | 156 ml | 312 ml | 625 ml | 1.6 L | 3.1 L |
| 40:1 | 25 ml | 125 ml | 250 ml | 500 ml | 1.25 L | 2.5 L |
| 50:1 | 20 ml | 100 ml | 200 ml | 400 ml | 1.0 L | 2.0 L |
| 75:1 | 13 ml | 67 ml | 133 ml | 267 ml | 670 ml | 1.33 L |
| 100:1 | 10 ml | 50 ml | 100 ml | 200 ml | 500 ml | 1.0 L |
Features
- Special Ashless Formulation:
Thanks to its special ashless formulation, it prevents pollution in spark-plugs and early ignition. - High Rust and Corrosion Resistance:
Thanks to its rust and corrosion inhibitor, successfully it protects bearings and gear surfaces against rust and corrosion. - Excellent Cleaning Feature:
Prevents deposit formation in engine. Keeps the engine clean. - Eco Friendly:
It does not harm the environment. It does not form oil layer on sea. - Excellent Lubrication and Cooling Feature:
Provides excellent lubrication and prevents engine from heating. - High Thermal Stability:
Thanks to its high thermal stability, it maintains its performance at high temperatures for a long time. Extends the life of the oil while maintaining a long oil change interval. Provides easy oil flow in cold climatic conditions.
Technical Specifications
| *Kinematic Viscosity @100°C, cSt | ASTM D 445 | 7,2 |
| *Viscosity Index | ASTM D 2270 | 154 |
| *Flash Point, °C | ASTM D 92 | 70 |
| *Pour Point, °C | ASTM D 97 | -36 |
*Data given above are typical properties and may vary slightly.
Performance
NMMA TC-W3
Revision Number
01.04.2019 / REV03