HEAT PROCESS HF
HEAT PROCESS HF
Hot shaping rice and non-ferrous metals, especially for use in hot-pressing process, good film forming capacity at the base oil is formulated oil for metal forming.
Usage
Ball valves, pipe fittings, furniture accessories, such as brass railings title and non-ferrous metals as well as warm spread to the entire mold press as a lubricant and release agent used directly in the pressing process.
Properties
| Long Mould Life | HF Hotforming special formulation enables the use of longer mold to reduce the formation of the surface contamination. |
| Resistance Against Friction, High Production Performance | High-quality content in the solid lubricant, graphite is achieved thanks to efficient series production and reducing friction. |
| Low Smoked Effect | Download the smell of smoked and minimal levels during the pressing problems. It prevents the undesirable flammability because it has a high flash point. Thanks to its additives and high quality base oils and performs regularly in the best way the lubrication and cooling. |
| High Performance Cooling and Lubrication | Thanks to its additives and high quality base oils and performs regularly in the best way the lubrication and cooling. |
Technical Properties
| ANALYSIS | METHOD | HF 101 | HF 102 |
| COLOR | - | BLACK | BLACK |
| VISKOZITY 40 °C, cSt | ASTM D 445 | 190 | 580 |
| Density g / cm³ | ASTM D 4052 | 0,9 | 0,91 |
| FLASH POINT, °C | ASTM D 92 | >200 | > 250 |
* Data given above are typical properties and may vary slightly.
OCTOBER 2014 REV01
lutfen_bekleyin